Cli-mate CLI-AP30 Especificações descarregar pdf (Página 65)

include with the pump station.

Step 5. Controller can also be programmed by using the included SD memory card.

i) Initialize the SD Card by first inserting it into the controller. Turn the SD Card function ON then

OFF in the Operation h Menu.

ii) Press the SD Card in to release it from the controller. Insert the SD Card into the USB adapter

and connect to your computer USB port.

iii) Open ReadMe file before proceeding to DataViewer software.

iv) If Windows NetFramework 2.0 is not installed on your computer, you will need to install it

before using DataViewer. NetFramework 2.0 software is located in the WE folder on the SD

Card.

v) Open DataViewer. Follow the onscreen instructions. Data fields will not populate until the SD

Card has been inserted into the controller long enough to record data.

vi) Reinsert the SD Card into the controller. Turn the SD Card function ON in the “Operation h”

Menu, then select YES to update setting from the SD Card.

vii) Leave the SD Card in the controller to gather up to one year of

system operation data.

󱚡 NOTICE

1. The controller will start in OFF mode. Pumps and valve will not operate until Operation

Mode is changed to Automatic.

2. Do not remove the SD Card from the controller without ﬁrst turning the SD Card function

OFF.

b) Basic Controller Settings: Depending on the system configuration the controller settings may be

adjusted. The following table provides the recommended values for the most basic functions that will be

used in a closed loop system. A complete list of all controller functions is presented in section 6.6, and

suggested settings for each system type can be found in the Apricus OG-300 Schematics and Parts List

Manual.

Function

Description

1.3.1. System 1

Choose System 1

1.13. US Version

Sets units to

F, Btu and US Gallons

1.14. Pump P1

Set to PhAC SC, which is variable speed pump control

1.15. Pump P2

Set to No SCPh, which is not a non-variable speed pump

2.1. Maxtemp tank1

Maximum allowed temperature in tank 1 (T2) during normal operation - set to

176

2.2. dTMax tank1

Difference (ΔT) between collector temperature (T1) and tank1 temperature

(T2) that will automatically engage pump1. Set to 14

Apricus Solar Collector Installation & Operation Manual - USA

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 119 120

Comentários a estes Manuais

Sem comentários

Cli-mate CLI-AP30 Especificações Página 65

Comentários a estes Manuais