Cli-mate CLI-AP30 Especificações descarregar pdf (Página 53)

1 Service

1.1 Language

English, Deutsch, Français, Svenska, Spanish

1.2 Time & Date

Select the date or time line with (+) or (-)

1.3 System

Choose between 5 systems, System 1 is default

1.3.1 System 1

Basic system, with 1 tank, 1 pump, 1 collector array and 2 or 3 sensors

1.3.2 System 2

System with 2 tanks, 1 pump, 1 valve, 1 collector array and 3 sensors

1.3.3 System 3

System with 2 tanks, 2 pumps, 1 collector array and 3 sensors

1.3.4 System 4

System with 1 tank, 1 pump, 1 valve, 2 collector arrays with 2 different cardinal directions (East / West) and 3

sensors

1.3.5 System 5

System with 1 tank, 2 pumps, 2 collector arrays with 2 different cardinal directions (East / West) and 3 sensors

1.4 Extra function

Choose between 3 extra functions

1.4.1 Thermostat

Use to connect an auxiliary or back-up heat source to your system

1.4.2 Cooling

Use to cool down the primary solar tank during times of high solar irradiation

1.4.3 Diffcontrol

Use to transfer heated water from one storage tank to another (System 1 only)

1.5 External Sensor

Use for collectors that require the sensor to be mounted on the piping external to the collector manifold

1.6 Protection function

Will automatically activate, when the collector temperature reaches the Maxtemp

1.6.1 MaxTemp

Adjustable from 230°F to 302°F with factory default set at 248°F

1.6.2 Cooling

Activates the solar pump (P1 or P2), if the temperature on the collector arrays (T1 or T4) exceeds the collector

Maxtemp

1.6.3 Overheat protection

Will stop all collector circulation, when the collector temperature registers more than 50°F above the collector

Maxtemp

1.6.4 Freeze Protection

Will keep the solar panel temperature above the Freeze Protection Temperature setting level by activating the

solar pump

1.7 Flow meter

If no flow meter is installed, you must manually enter the max (100%) pump flow in gallons/minute

1.8 Reset to Factory default settings

Reset all settings to their factory default

1.9 Reset operation time

Reset the all of the operation hours to zero

1.10 Time graph temperatures

Adjusts the graphical scale for the Temp vs. Time graphs

1.11 Time graph operation

Adjusts the graphical scale for the Operation h menu vs. time graphs

1.12 Calibration of sensors

Calibrate all the temperature sensors connected to your system

1.13 US Version

Allows selection of the units of measurement that will be displayed

1.14 Pump P1

Choose the type of the pump speed control used on the output P1 (Type: No SC, PhAC SC or PWM SC)

1.15 Pump P2

Choose the type of the pump speed control used on the output P2 (Type: No SC, PhAC SC or PWM SC)

1.16 GDS1

Select inputs for analog GRUNDFOS sensors (Type: NC not connected, VFS Flow sensor or VPS pressure

sensor)

1.17 GDS2

Select inputs for analog GRUNDFOS sensors (Type: NC not connected, VFS Flow sensor or VPS pressure

sensor)

1.18 Priority tank

Designate one of the system tanks as priority (tank1 or tank2) Will only display if configuring a system with

two tanks

2 Setting

2.1 Maxtemp tank1

Maximum desired water temperature in tank1

2.2 dTMax tank1

Difference (ΔT) between collector temperature (T1) and tank1 temperature (T2) - will engage pump1

2.3 dTMin tank1

Difference (ΔT) between collector temperature (T1) and Tank1 temperature (T2) - will disengage pump1

2.4 Maxtemp tank2

Maximum desired water temperature in tank2

2.5 dTMax tank2

Difference (ΔT) between collector temperature (T1) and tank2 temperature (T4) - will engage pump1 with system2

or pump2 with system3

2.6 dTMin tank2

Difference (ΔT) between collector temperature (T1) and tank2 temperature (T4) - will disengage pump1 with

system2 or pump2 with system3

2.7 Mintemp Prio tank

Minimum temperature setting for the priority tank of systems with two tanks

2.8 Min rev pump

Minimum speed of pumps set to Phase SC (PhAC SC)

2.9 Boost time (Booster pump)

Select the running time of P2 (Booster Pump)

2.10 Mintemp Collector

Select the minimum collector temperature required for system start-up

Apricus Solar Collector Installation & Operation Manual - USA

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 119 120

Comentários a estes Manuais

Sem comentários

Cli-mate CLI-AP30 Especificações Página 53

Comentários a estes Manuais